Main Activities

MJCSB’s main activities are as follow:-

1.

To conduct investigation and prepare report on Mechanical and Electrical services

2.

To provide consultancy services on M&E installation for now and existing buildings.

3.

To provide advise to client on the M&E installation and requirement.

4.

Managing and coordination application and supply of services into building like water supply, power supply, telecommunication and sanitary.

5.

Perform 3rd party review on M&E design as requested by client.

6.

Advising client on contractual issues on M&E installation.

7.

Close liaison with manufacturer and supplier to keep pace with technological development of M&E hardware.

8.

Close liaison with service providers and local authorities to ensure system and equipment that are designed and installed comply with relevant standards and regulations.

9.

Followings are MJCSB’s scope of works apply to both new installation and existing buildings :-

 

Pre-contract

a)

Attending meeting with client, architect, Civil and Structural Engineer and Quantity Surveyor to establish M&E requirement and work scope.

b)

Visiting proposed construction site to established best incoming route for water, power and telecommunication system into the building.

c)

Designing M&E system, preparing tender drawing and specification.

d)

Preparing documents, bill of quantities and installation cost estimate.

e)

Managing the calling of tender.

f)

Evaluating tender and preparing tender report to the client.

g)

Preparing contract document and distributing to relevant parties and ensuring Performance Bond is received from contractors.

 

Post-contract

a)

Attending site meeting, technical meeting and client – consultancy meeting.

b)

Review, comment and approving construction drawings and shop drawings submitted by contractor before commencing works.

c)

Review, comment and approving M&E hardware and equipment submitted by contractor before commencing works.

d)

Managing and supervising contractor’s work at site ensuring compliance with contracted requirement.

e)

Preparing progress of work report and recommending progress payment claim submitted by contractor.

f)

Issuing Engineer’s Instruction and Work Variation order as required.

g)

Attending Factory Acceptance Test for M&E equipment and plant and producing report.

h)

Performing Inspection, testing and commissioning of M&E system installation at site or at factory.

 

Post-completion

a)

Review, comment and approved As-Built Drawings and Operation and Maintenance Manual submitted by contractor.

b)

Review and inventorized M&E plants and equipment.

c)

Joint inspection with client and producing installation defect list.

d)

Managing handling over process, preparing handling over notes, Certificate of Practical Completion and Certificate of Final Account and approving.

e)

Reviewing and approving Maintenance Work scope and Maintenance Schedule submitted by contractor.

f)

Issuing completion report on repair of defective works during defect liability period.

g)

Advising the client on the need of competence personnel to operate and maintain plants and equipment if necessary.

h)

Advising the client on the need of signing long-term schedule maintenance contract after the completion of free maintenance period.

 

List of Installation 

1.

M&E installation in office complex, factory and stadium.

 

Electrical Installation

a)

Internal Low Voltage System

b)

External Low Voltage System

c)

High Voltage System

d)

Central Electrical and Monitoring System

e)

Telecommunication System

f)

Public Address System

g)

Intercom and Fireman Communication System

h)

Conference System

i)

Master Antenna System and Equipment

j)

Standby Generation

k)

Audio Video System

l)

Motorised Curtain and Track System

m)

Stage Lighting System

n)

Stage Sound System

o)

Integrated Lightning Protection and Surge Protection and Voltage Stabilizing System

p)

Digital Scoreboard and LED Display System

q)

Structural Cabling and Computer Networking System

r)

Sewerage Treatment Plant

 

Mechanical Installation

a)

Air Conditioning, Ventilation and Exhaust Fan System

b)

Fire Protection System

c)

Fume Board and Laboratory Equipment.

d)

Lift and Escalator System

e)

Water Tank, Cold and Hot Water Plumbing System

f)

Water Pump System

g)

Overhead Crane System

h)

Kitchen Equipment System


 

2.

M&E installation in infrastructure works like road, highway, Airport and Seaport

 

Electrical Installation

a)

Street Lighting inclusive feeder pillar overhead / underground cabling

b)

Traffic Light System and Equipment

c)

Emergency Telephone System and PABX

d)

Traffic Surveillance and Management System

e)

CCTV System

f)

Variable Message System & LED Display

g)

Toll Equipment

h)

Cash Transfer System

i)

High Mask Lighting System

j)

Airport Lighting System

k)

Frequency Converter System

 

Mechanical Installation

a)

Booster pump system

b)

Quayside Crane / Ship to shore Crane

c)

Rubber tired Gantry Crane

d)

Forklifts

e)

Reach Stacker

f)

Lorry, Trailer, and Other vehicles

g)

Pilot boat

h)

Tug boat

3.

M&E installation in hospital, Healthcare Centre and Health Clinic

 

Electrical Installation

a)

Nurse Call System

b)

Diagnostic Imaging Equipment and X-ray Machine

c)

Operation light for operating theatre

d)

Examination light

e)

Clocks System

f)

Digital Call System

g)

CCTV and Security System

h)

Intruder Alarm

i)

Call Bell System

j)

Card Access System

k)

Interruptible Power System

l)

Standby Generator

 

Mechanical Installation

a)

Medical gas and pipeline system

b)

Air Conditioning, Ventilation and Exhaust Fan system

c)

Dental Chair and Dental X-ray machine

d)

Lift, dumbwaiter and escalator system

e)

Sterilizer and associated equipment

f)

Boiler, Calorifier and Hot water and Escalator system

g)

Building management and automation system

h)

Booster pump system

i)

LPG system